243 Thin Mounts 3/16": Solid Surface (100 Mounts)

Application

The 243 Thin Mount is designed for thin panels made of plywood, particle board composites, plastics, and solid surfaces. The 243 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with a engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty.  The gap between the two heads is 3/16", the threads are 3/8" deep, leaving 3/32" of material on 1/2" panels. The 243 Thin Mounts 3/16" is compatible with the 210 Lock & 200 Hanger.

Specifications

The 243 Thin Mount 3/16" head is the same size as a Standard #10 pan head screw, 0.371".  There is a narrow, but strong 1/8" shaft between two heads that allow for locking and 1/16" expansion and contraction.  The ribs are threaded and fit snugly in a 1/2" diameter hole with a flat bottom.  These ribs are small and sharp for better gripping performance. The 243 Thin Mount 3/16" can be epoxied into Corian and other solid surfaces or press fit.

Note * : We recommend that you allow at least 1/32" of additional depth to your pre-drilled holes to prevent bulging. 

Order Here (Scroll Down for Related Accessories)

Videos