wood screws, dry wall screws, mdf screws, plywood screws, particle board screws

343 Thin Mounts 5/16" Gap, Solid Surface (100 Screws)

The 343 Thin Mount 5/16" is designed for thinner 1/2" panels made of plywood, particle board composites, plastics, and solid surfaces. The 343 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with engineered automotive nylon that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 5/16", the threads are 3/8" deep, leaving 3/32" of surface material on 1/2" panels. The 343 Thin Mount 5/16" is compatible with all Zero & Green Glide Fasteners.

Application

The 343 Thin Mount 5/16" is designed for thin panels made of plywood, particle board composites, plastics, and solid surfaces. The 343 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 5/16", the threads are 3/8" deep, leaving 3/32" of surface material on 1/2" panels. The 343 Thin Mount 5/16" is compatible with all Zero & Green Glide Fasteners.

Specifications

The 343 Thin Mount 5/16" head is the same size as a Standard #10 pan head screw, 0.371". There is a narrow, but strong 1/8" shaft between two heads that allow for locking and 1/16" expansion and contraction. The ribs are threaded and fit snugly in a 1/2" diameter hole with a flat bottom. These ribs are small and sharp for better gripping performance. The 344 Thin Mount 5/16" can be epoxied into Corian and other solid surfaces or press fit.

Note * : We recommend that you allow at least 1/32" of additional depth to your pre-drilled holes to prevent bulging.

More Information is Available Under "Video/Downloads"

Quick Introduction Animation:

Installation Guides:

349 Upholstery Mount, Acoustical Panel (pdf)
349 Upholstery Mount, Boat Cushion (pdf)