Star Hanger Fasteners Applications

mounting screws
wood screws, dry wall screws, mdf screws, plywood screws, particle board screws
thin mounts section
thin mount lock corian
thin mount in use furring to solid
Star Hanger Installation Pic 2
thin mount driver
thin mounts gap
green glides thin mount in use
zero side mount, thin mount sec corain
×

343 Thin Mounts 5/16" Gap, Solid Surface (100 Screws)

The 343 Thin Mount 5/16" is designed for thinner 1/2" panels made of plywood, particle board composites, plastics, and solid surfaces. The 343 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with engineered automotive nylon that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 5/16", the threads are 3/8" deep, leaving 3/32" of surface material on 1/2" panels. The 343 Thin Mount 5/16" is compatible with all Zero & Green Glide Fasteners. 

Read more

Price: $19.95
  • Product Description
  • Introduction Animation
  • Installation Guides
  • Demonstration Videos
  • Drawings & Models
  • Product Specifications

Application

The 343 Thin Mount 5/16" is designed for thin panels made of plywood, particle board composites, plastics, and solid surfaces. The 343 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 5/16", the threads are 3/8" deep, leaving 3/32" of surface material on 1/2" panels. The 343 Thin Mount 5/16" is compatible with all Zero & Green Glide Fasteners.

Specifications

The 343 Thin Mount 5/16" head is the same size as a Standard #10 pan head screw, 0.371". There is a narrow, but strong 1/8" shaft between two heads that allow for locking and 1/16" expansion and contraction. The ribs are threaded and fit snugly in a 1/2" diameter hole with a flat bottom. These ribs are small and sharp for better gripping performance. The 344 Thin Mount 5/16" can be epoxied into Corian and other solid surfaces or press fit.

Note * : We recommend that you allow at least 1/32" of additional depth to your pre-drilled holes to prevent bulging.

More Information is Available Under "Video/Downloads"

Quick Introduction Animation:

  • Star Hanger Systems on Facebook
  • Star Hanger Systems on twitter
  • Star Hanger Systems on Linkedin
  • Star Hanger Systems on Google
  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal
Copyright © 2024 Star Hanger Systems