360 Countertop Bolt
360 Counterctor Bolt
The 360 Countertop Bolt is designed to tightly secure countertops seams together. The hybrid 360 Countertop Bolt fills the gap between the "hard-to-use" Tite-Joint Fastener and the expensive, Gear Head Zip Bolts. The 360 Countertop Bolt can be tightened in seconds. Our 360 Countertop Bolt is simple, inexpensive, strong and requires only common tools with no learning curve. The 360 Countertop Bolt is a valuable upgrade to the traditional tite joint bolt.
The 360 Countertop Bolt is a custom made 1/4” x 3-1/2” x 3/16” Allen head bolt, coupled with a typical rectangular steel washer. Installers find that a 3/16” Ball End Hex Wrench used with a battery operated drill greatly improves installations times. The traditional hex head is replaced with an Allen head which allows tightening with a standard ball end Allen wrench or our 365 Countertop Bolt, Ball End Allen Wrench which, if used in combination with a hand drill vastly speeds up installation times.
Please see Connector Bolt Video: System Infographic & Video.
- Used with a drill, the 360 Countertop Bolt is about 10 times faster than a standard bolt
- The cost is similar to old style bolts
- Stronger than traditional bolts, they are heat treated to N-5
- Also available: a CNC Router Cut 3/8" Phenolic Template
Cost & Benefit Estimates
With 4 countertop bolts per 24”countertop that take about 10 minutes per countertop seam to tighten. At $50.00 per hour, or $0.83 per minute the per seam installation cost is $8.30. With the 360 Countertop Bolt, installation times are cut in half; saving $4.15 per seam.
Strength Testing (with 3/4", 45lb. particle board)
- Tensile Failure (Horizontal pull) = 600 lbs.
- Working Strength (pulling slot together) = 100 lbs.
* Bolt Strength, at over 2,000 lbs. far exceeds the strength of the particleboard slot.Other Resources
Headings > Technical > CAD Drawings Downloads
Headings > Videos > Introduction Animations
Headings > Videos > Installation Videos
Headings > Technical > Product Specifications
Sam Porter, P. 803-250-9608 E firstname.lastname@example.org
Charles Porter, P. 803-730-4463 E email@example.com
365 Countertop Bolt, Ball End Allen Wrench
370 Countertop Bolt, Router Template
915 Router Bit, Flush Offset (Works with all Star Templates)
360 Countertop Bolt
Product SpecificationsSKU 321, Countertop Bolt, Specs, 6-26-17
DownloadsSKU 321, Countertop Bolt, Template (dwg)