722 Double Sided Thin Dowel (100 Dowels) CLEARANCE 50% Off

Application

The 722 Double Sided Thin Mount is a inexpensive method to attach two thin panels together, permanently. They work well on plywood, particle board composites, plastics, and solid surfaces. The 722 Double Sided Thin Mount inserts into a drilled or routed 1/2" hole. The mounts are made of engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty. The threads are 3/8" deep, leaving 3/32" of surface material on 1/2" panels. The 722 Double Sided Thin Mount works independently and is not compatible with any other fastener. These are basically dowels and are not removable, have little room for the natural expansion and contraction of panels. They can be used to attach dissimilar materials like wood and solid surface, but only in small panel, maximum of 24" x 24"

Specifications

The 722 Double Sided Thin Mount. There is a narrow 1/8" shaft between two heads that allow for locking. The ribs are threaded and fit snugly in a 1/2" diameter hole with a flat bottom. These ribs are small and sharp for better gripping performance. The 722 Double Sided Thin Mount 5/16" can be epoxied into Corian and other solid surfaces or press fit. They can be used to attach dissimilar materials like wood and solid surface, but only in small panels that move less than 1/32", a maximum of 24" x 24"

Note * : We recommend that you allow at least 1/32" of additional depth to your pre-drilled holes to prevent bulging.

More Information is Available Under "Video/Downloads