Star Hanger Systems

Star Hanger Fasteners Applications

Epoxy Mount, (Screws Included) SKU 230

$0.59

Epoxy Mount

Applications
The Solid Surface Epoxy Mount, is designed for installing materials too brittle to hold a screw.  Some examples would be thin panels, Corian, MF, sculpted panels, acrylics, light metal panels, glass and solid surfaces. The Epoxy Mount works with virtually any material that will accept an epoxy.  The perforated, mild-steel mounting plate can be epoxy-mounted to almost any surface with high strength and predictability. The small perforations improve mechanical adhesion to the epoxy. 

Description
The Epoxy Mount is made from a steel pin welded to a zinc coated steel plate.  The Epoxy Mount maybe used in combination with a variety of Star 3/16" compatible hangers or clips, and attached to various panels with a 3M Scotch-Weld 110 Epoxy.  Star 3/16" Alignment Pins can be used to mark Mount locations onto panels.  

Product Advantages

  • Designed to directly hang solid surfaces such as acrylic, Corian, and glass flush with the wall

  • Allows the installer to rely not only on traditional silicone, but a combination of silicone and epoxy mounts

  • Quick and easy to install – Corian panels take approximately one hour per full-size sheet

Cost & Benefit Estimates
Mounting Solid Surfaces to a walls, and waiting until the glue sets is time consuming and frustrating work.  It takes approximately 6 hours per 30” x 96” section (not including the seams). 

With practice, this can be reduced by about 2 hours per sheet.

Please see www.starhanger.com > Technical > Cost Estimates, for details 

 

Strength Testing, with 1/2", solid surface

  • Tensile Failure (Horizontal pull) = 250 lbs. / Working Strength, Pull from Furring = 25 lbs.
  • Shear Failure (Vertical weight holding) = 350 lbs. / Working Strength, Weight holding = 25 lb

Other Resources  
Shop Drawings: 
Headings > Technical >CAD Drawings Downloads
Introduction Animations  
Headings > Videos > Introduction Animations
Installation Videos:  
Headings > Videos > Installation Videos
Product Specification: 
Headings > Technical > Product Specifications
Sales: 
Sam Porter, P. 803-250-9608 Esporter@starhanger.com 
Technical Question: 
Charles Porter, P. 803-730-4463 Ecporter@starhanger.com 


Accessories
Star 1-3/8" Hanger, SKU 200
Lock 1”
3/16" Alignment Pins (25 Pins), SKU 211 

 

Epoxy Mount

Applications
The Solid Surface Epoxy Mount, is designed for installing materials too brittle to hold a screw.  Some examples would be thin panels, Corian, MF, sculpted panels, acrylics, light metal panels, glass and solid surfaces. The Epoxy Mount works with virtually any material that will accept an epoxy.  The perforated, mild-steel mounting plate can be epoxy-mounted to almost any surface with high strength and predictability. The small perforations improve mechanical adhesion to the epoxy. 

Description
The Epoxy Mount is made from a steel pin welded to a zinc coated steel plate.  The Epoxy Mount maybe used in combination with a variety of Star 3/16" compatible hangers or clips, and attached to various panels with a 3M Scotch-Weld 110 Epoxy.  Star 3/16" Alignment Pins can be used to mark Mount locations onto panels.  

Product Advantages

  • Designed to directly hang solid surfaces such as acrylic, Corian, and glass flush with the wall

  • Allows the installer to rely not only on traditional silicone, but a combination of silicone and epoxy mounts

  • Quick and easy to install – Corian panels take approximately one hour per full-size sheet

Cost & Benefit Estimates
Mounting Solid Surfaces to a walls, and waiting until the glue sets is time consuming and frustrating work.  It takes approximately 6 hours per 30” x 96” section (not including the seams). 

With practice, this can be reduced by about 2 hours per sheet.

Please see www.starhanger.com > Technical > Cost Estimates, for details 

 

Strength Testing, with 1/2", solid surface

  • Tensile Failure (Horizontal pull) = 250 lbs. / Working Strength, Pull from Furring = 25 lbs.
  • Shear Failure (Vertical weight holding) = 350 lbs. / Working Strength, Weight holding = 25 lb

Other Resources  
Shop Drawings: 
Headings > Technical >CAD Drawings Downloads
Introduction Animations  
Headings > Videos > Introduction Animations
Installation Videos:  
Headings > Videos > Installation Videos
Product Specification: 
Headings > Technical > Product Specifications
Sales: 
Sam Porter, P. 803-250-9608 Esporter@starhanger.com 
Technical Question: 
Charles Porter, P. 803-730-4463 Ecporter@starhanger.com 


Accessories
Star 1-3/8" Hanger, SKU 200
Lock 1”
3/16" Alignment Pins (25 Pins), SKU 211 

 

Qty Price
1 $0.59
250 $0.57
500 $0.55
1000 $0.53
5000 $0.50
  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal