Star Hanger Systems

Star Hanger Fasteners Applications

Star Hanger System Endorsements

Please feel free to send any endorsements or comments to
There is also a comments & question section on each product page.

Chesapeake Millworks, Inc.

You will be pleased to know the Green Glides worked out great for us. I am in engineering and programmed everything to run on the CNC, veneer panels & backer panels. Our installers were highly skeptical that there would be enough tolerance built in for adjustment, but they were all pleasantly surprised how quick & easy everything went together on-site. We definitely intend to use them again in the future and are interested in checking out the triangle glide when it is available.Thanks for a great product!

Sep. 30, 2015

Beth Haywood
Project Engineer
Chesapeake Millworks, Inc.
Owings, MD

Rowland Woodworking

We have been stocking Star Hanger fasteners for some time. We use the Star Zeros for our ADA front panels and the installers like them also.

Sep. 29, 2015

Kristine Cox
Rowland Woodworking
High Point NC.
President, Carolinas Chapter AWI

James McGrew Cabinetmakers

We have been stocking Star fasteners for some time. We just used the Star Hangers for direct panel connection to the GWB for the Gaston Committee Center maple panels. This project could not budget for a full furring system; they were delighted with the results and the $ 30.00 psft. price.

Sep. 25, 2015

James McGrew
Columbia SC 29203

Southern Commercial Interiors

We first used Star Hangers on a job that had Panels applied directly to drywall. They worked great; using the index pins made the install fast and simple.We also used the Green Glide Hangers on vanity fronts. Again fast and simple and these thing don't come out. Great Product!!

Sep. 26, 2015

Jeff Threatt
Owner Southern Commercial Interiors
Columbia SC.

Specialty Woodwork Inc

The Green Glide is perfect for us as we cut our furring on the cnc router. The stadium shape makes sure that alignment isn't an issue for our fabricators and the narrow width means they are great for concealing behind small panels and overlays.

Sep. 25, 2015

Jacob Edmond
Sr. Engineer
Specialty Woodwork Inc.
Lexington SC.

CAMheads CNC Router Forum, Brian

Last winter I completed the millwork for a plastic surgeon's office in Long island. There was extensive high gloss, MDF panels throughout the hallways and reception area. The thoughts of having to install using the traditional Z clips was going to take forever, so I found star hangers products and have never looked back. The zero clip was what I used and cut the install time at least in half and made my reveals what I wanted. This is an innovative company with a great product. They were very helpful and have a great series of installation videos. These things really HOLD. In fact they can be removed but they have extreme holding strength. I was actually thinking of using them to install the cabinets but they would not guarantee that they would hold.....I think they would but its a liability thing for the company. Great product though. Z clips will still have a place in the install world but this is a great alternative. I w'll try to find some pics and post.

Sep. 25, 2015

From: "CAMheads CNC Router Forum By: CAMaster CNC"
This thread is located at

Boone Installation

The Green Glides are the best hanger system I have ever used, the panel slide perfectly into place. Then we locked the panels into place with a hard pull, and they don't move.

Sep. 20, 2015

Billy Boone
Columbia SC.

James McGrew Cabinetmakers

We have begun to use the Star Hanger on many other uses such as Handicap Vanities and Bench Back Seating. Last week we had an application that had to be installed on OLD, crumbly Brick, Danny placed a sub cleat on brick the attached panel from front with Zeros. Doing it this way allowed him to hide fasteners under trim strips in front and "Snap" them on after the Hang. Smooth and Profitable.

Aug. 25, 2015

Mike take a look at this, it is some miracle method for installs. A friend of mine in Columbia is developing this.
James McGrew
Columbia SC

JBI Interiors Parisi Inc

We used the Star Lock 1 diameter insert for our new Hollister Project. The system worked well and we look forward to using the newer oval shaped product.

Aug. 25, 2015

Anthony DAmico
Newtown, PA

Wooden Valley Carpentry Inc.

These hangers are awesome. Great product, saved us a lot of time on install. Low profile keep panels tight to the walls. My guys loved working with them. Makes our job a breeze installing panels. We also used them on curved walls as well with stainless strips horizontal to panels. Panels fit tight to the panels. We are redoing our show room with wall panels and I need to order some more and have recommended your product to other shops.

Aug. 10, 2015

Jon Rickert
Wooden Valley Carpentry Inc.
Winthrop Harbor, IL

Specialty Woodworks, Inc.

We have been using a variety of Star Hanger fasteners in my plant for 2 years now and they have been a big help. However, I have never personally installed them until my wife recommended I fix up the bath room. The Star Hangers were the only part of the project that went great. These things are fast, simple and strong.

June 10, 2015

Graham Houghten
Specialty Woodworks, Inc.
Lexington, SC

  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal
Copyright © 2021 Star Hanger Systems