Z clips, wall clips, panel clips, z clip

400 NZ Clip (1/4" Staple Installed)

The Star Hanger 400 NZ Clip is a wall panel clip designed to replace traditional aluminum clips. These clips are made of high strength reinforced nylon, which is molded under 90 tons of high pressure, resulting in a clip stronger than most Aluminum Z Clips. The flexible nature of the nylon can reduce installation times up to 60% by incorporating staples into location placement and using the 410 NZ Alignment Clip to reduce measuring time. The 400 NZ Clip is a standard wall panel clip size at 2” Long, 1 ¾” Height, ¼” Thick. When fully seated as a pair the height is 3”. The screw layout is a perfect 1-1/2” square and the lift off is 3/8”. There are 3 preformed staple slots fitted for a ¼” Staple. The staple option allows for quick placement. This clip can be used with all other Star Hanger Systems 400 Series products to expand the application possibilities.

DESCRIPTION

Note: The application can later be reinforced with screws to meet strength requirements.

INSTALLATION

The 400 NZ Clip can be quickly installed because the clip locations do not have to be perfectly horizontal. Then the adjacent clip location can be marked with our accessory tool the 410 NZ Alignment Clip. Pressing the panel firmly against the blades of the 410 NZ Alignment clip will leave "V" shaped marks to line the upper corners of the panel clip. There is also a unique ogee profile that snaps into place, letting the installer know the panel is seated properly. (See Installation Guide and Videos for more info.)

SPECIFICATIONS

BENEFITS: Removable & Hidden, Fast & Easy field installation, Prefabricated Panel & Furring systems pack flat for ideal shipping, allows 1/16” expansion, minimized measuring with the 410 NZ Alignment Clip (Sold Separately). Proven to reduce installation time by 60%.
SUGGESTED MATERIALS: Wood Panels Min. 5/8”, Acoustic Panels, Frames, Trim, Plywood, Particle Board/MDF, Plastic, Solid Surface, etc.
FASTENER TYPE: Surface Mounted, Drop in lock
DISTANCE FROM WALL TO PANEL: ¼” THICK CLIP
REQUIRED REVEAL: 3/8”
HOLE SIZE: Fitted for #8 Screws, 1-1/2” Square pattern & 3x ¼” preformed
staple slots
SPACING: Approx. 18”- 24” o.c. to prevent warping
MAXIMUM PANEL SIZE: 4’x 12’
LOAD CAPACITY: Max 25lbs per connection point
STOCK SIZE: Sold in packs of 10, 100, 500, 1000, and 800ct Bucket Kits.
PRICING: Wholesale
MATERIAL: Nylon 15% Fiberglass Infused | Light Gray Color

TESTED STRENGTH RATING: With 3/4” 45lb Particle Board
Tensile Failure (Horizontal pull) Failure = 45 lbs. / Pull from Furring = 25 lbs.
Shear Failure (Vertical hold) Failure = 150 lbs. / Holding Strength = 25 lbs.

SAFETY NOTE: NOT RECOMMENDED FOR OVERHEAD USE WITHOUT A SAFETY
LANYARD. VERTICAL APPLICATIONS ONLY.