420 S Clip, Single
The 420 S Clips are sold as single clips, generally used to mount panels to furring in the field. It can also be used with full length bars (SKU 430) to mount panels directly to drywall. The 420 S Clip is a high performance upgrade to the more traditional panel clip, providing improved ‘locking’ and fast precision mounting. The "S" Clip is strong and easy to adjust and has higher resistance to side movement than other mounting clips. It can be used with all wood, MDF, and architectural panels with or without furring. Like most clips, it requires a ¼" pocket for flush-mounting panels.
Read more ↓
- Product Description
- Introduction Animation
- Installation Guides
- Demonstration Videos
- Drawings & Models
- Product Specifications
Includes 3 Screws per clip
Application
The 420 S Clips are sold as single clips, generally used to mount panels to furring in the field. It can also be used with full length bars (SKU 430) to mount panels directly to drywall. The 420 S Clip is a high performance upgrade to the more traditional panel clip, providing improved ‘locking’ and fast precision mounting. The "S" Clip is strong and easy to adjust and has higher resistance to side movement than other mounting clips. It can be used with all wood, MDF, and architectural panels with or without furring. Like most clips, it requires a ¼" pocket for flush-mounting panels.
Description
The 420 S Clip is made of extruded aluminum cut to 2" lengths, and when paired they require a 2" x 3-1/2" pocket (3/8" lift-off). Features include a unique ogee profile that snaps into place, letting the installer know that the location is correct, and the panel is seated properly. There is 1 screw-slot for adjustment and 2 for locking, and the clips are ribbed along the backs, aiding fine adjustments, (1/32" increments), providing extra strength and security.
Installation
The 420 S Clip can be installed even quicker using the 410 NZ Alignment Clip. Check out the link and watch this short video on the 410 NZ Alignment clip.
Cost Benefit Estimates
Traditional panel clips are time consuming to layout and install, taking about 6 minutes per pair. At $50.00 an hour, that is $ 4.97 per clip. With use of the 410 NZ Alignment Clip time can be cut in half, while the hardware cost, which is as low as $0.25 per clip, is competitive with all other premium clips.
More Information is Available Under "Video/Downloads
Order Here: Use Drop-Box Below to Select Count.
Quick Introduction Animation:
Installation Guides:
420 S Clip & Long Bars, Wall Panel (pdf)
420 S Clip, Wall Panel (pdf)
Shop Demonstration Videos:
Drawings & Models:
SKU 420, S Clip, 2D Drawing (pdf)
SKU 420, S Clip, 3D Model (dwg)
Share this item: