CLEARANCE 50% OFF

243 Thin Mounts 3/16" Gap, Solid Surface CLEARANCE 70% Off

The 243 Thin Mount is a discontinued clearance item 70% off while supply last, final sale. Discount appears at check out.

The 243 Thin Mount is designed for thin panels made of plywood, particle board composites, plastics, and solid surfaces. The 243 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with a engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 3/16", the threads are 3/8" deep, leaving 3/32" of material on 1/2" panels. The 243 Thin Mounts 3/16" is compatible with the 210 Lock.

Application

The 243 Thin Mount is designed for thin panels made of plywood, particle board composites, plastics, and solid surfaces. The 243 Thin Mount inserts into a drilled or routed 1/2" hole. The Thin Mounts are made with an engineered automotive plastic that is slightly pliable and will not void the solid surface fabrication warranty. The gap between the two heads is 3/16", the threads are 3/8" deep, leaving 3/32" of material on 1/2" panels. The 243 Thin Mounts 3/16" are compatible with the 210 Lock.

Specifications

The 243 Thin Mount 3/16" head is the same size as a Standard #10 pan head screw, 0.371". There is a narrow, but strong 1/8" shaft between two heads that allow for locking and 1/16" expansion and contraction. The ribs are threaded and fit snugly in a 1/2" diameter hole with a flat bottom. These ribs are small and sharp for better gripping performance. The 243 Thin Mount 3/16" can be epoxied into Corian and other solid surfaces or press fit.

Note: We recommend that you allow at least 1/32" of additional depth to your pre-drilled holes to prevent bulging.

More Information is Available Under "Video/Downloads"

Quick Introduction Animation:

Installation Guides:

210 Lock,Panels (pdf)