335 Mounting Euro Screws 5/16" Gap, Cut to 5/16" long
The 335 Mounting Screw has 5/16" gap between the two heads, with the threads cut down from 7/16" to 5/16" long and/or used for 1/2" panels.
NOTE: The 335 Mounting Euro Screws with 5/16" Thread length are custom-cut in-house per order. This is a timely task that often takes a minimum of a week to get into production. Please expect longer lead times for orders of 100 and over. If you need a faster solution the 343 Thin Mount is an incredible solution designed specifically to replace this product. The 343 Thin Mount is easy to maintain stock and readily available. For more information about that Item click here. https://www.starhanger.com/products/343-thin-mounts-5-16-solid-surface-100-screws
335 Mounting Screws 5/16" are compatible with:
300 Green Glide, 310 Green Glide Triangle, 320 Zero, 325 Zero Side Mount
Read more ↓
- Product Description
- Introduction Animation
- Installation Guides
- Demonstration Videos
- Drawings & Models
- Product Specifications
Application
The 335 Mounting Screw has 5/16" between the two heads, with the threads re-cut from 7/16" to 5/16" long and/or used for 1/2" panels. These are custom cut in-house per order.
Note: 11-11-2021
Star Hanger has not been able to make these short screws with our automatic screw machines. Our Die vendors tell us it is not possible due to the weight ratios. The screw has to be manually cut off, which is time consuming, and expense.
We believe that the 5/16" thick Galaxy Fasteners replace the need for the short mounting screw. We are therefore raising our price of these screws to cover the cost.
335 Mounting Screws 5/16" are compatible with:
300 Green Glide
310 Green Glide Triangle
320 Zero
325 Zero Side Mount
Specifications
The head is the same size as a Standard #10 flat head screw; however, it has a narrower shaft to allow for movement. The threads have the same diameter as a 5mm Euro Screw and can be used in 7/64" holes. The screw thread length is 5/16" and has a flat bottom that requires pre-drilling.
Note: We recommend that you allow at least 1/16" of additional length to your pre-drilled hole to prevent bulging.
More Information is Available Under "Video/Downloads"
Share this item: