Star Hanger Fasteners Applications

Star Hanger, Green Glide, CNC panel clip, Insert allows precision alternative to Z Clip for mounting panels.
Star Hanger, Green Glide, precision concealed clips for mounting panels to CNC cut furring.
Star Hanger, Green Glide, Project wood panel mounted to a spiral stair with precision concealed Z Clip for mounting panels.
Star Hanger, Green Glide, Project photograph of wood panel surrounding a pair of doors with precision concealed Z Clip for mounting panels.
Star Hanger, Green Glide, precision concealed clips for mounting panels to CNC cut furring.
Star Hanger, Green Glide, Rendering of wood panel mounted to acoustical panel on furring precision concealed Z Clip for acoustical panel.
Star Hanger, Green Glide, Rendering of wood panel mounted to a reception desk with precision concealed Z Clip for mounting panels.
CAD Drawing of Green Glide, Router Template SKU 911
Star Hanger, Green Glide & Ceiling Clip work together to mount a wood soffit.
Green Glide, Drill Template, 2
Green Glide Router Template SKU 911, used to route slot for the Green Glide, (5/16
green glide alignment pins
green glide, alignment pins
green glide zero soffit in use
green glide ADA unit in use
green glide hammer in use
drill template offset in use
green glide router template in use
sheetrock fastener trim in use
glide sheetrock set acoustic in use
glide sheetrock set, fabric in use
green sheetrock set, complex panels in use
green glides thin mount in use
×

300 Green Glide, 5/16" Gap

The 300 Green Glide is designed to mount wall panels using a prefabricated furring system. The 300 Green Glide is a precision, hidden-insert fastener that compresses into a pre-routed slot, and is best suited to pre-engineered (CNC cut) panel-furring systems. The 300 Green Glide gives the fabricator the ability to exactly control the placement of wood panels, ADA panels, fabric panels, artwork, graphics, upholstery and more.

Read more

  • Product Description
  • Introduction Animation
  • Installation Guides
  • Demonstration Videos
  • Drawings & Models
  • Product Specifications

Green Glide Diagram

Application

The 300 Green Glide is designed to mount wall panels using a prefabricated furring system. The 300 Green Glide is a precision, hidden-insert fastener that compresses into a pre-routed slot, and is best suited to pre-engineered (CNC cut) panel-furring systems. The 300 Green Glide gives the fabricator the ability to exactly control the placement of wood panels, ADA panels, fabric panels, artwork, graphics, upholstery and more.

Using this insert is especially advantageous for panel-furring installations with complex, custom-shaped panels. The holes and pockets for the 334 Mounting Screws 5/16" and 300 Green Glide can be pre-drilled and fitted in the shop; then quickly removed (if necessary) for shipping and reinstalled in the exact same location in the field prior to hanging the panels and furring.

Description

The 300 Green Glide is faster, stronger and more precise than any other hidden-panel hanging system. The fastener is held firmly in place by compressing into a 5/8" x 1-1/4" routed pocket ½" deep. This elongated design provides the keyhole length needed for the 334 Mounting Screw 5/16" in the panel to glide smoothly and firmly into place. The advantage of the full CNC layout is that the double-headed screws are set in a specific location on the panel by starting at 2" off each corner. This mounting location can be pre-drilled and/or quickly determined in the field, with our 318 Green Glide, Drill Template 2" Offset (Includes Template, Drill, & Stops).

Product Advantages

  • Panel-furring systems can be pre-engineered to provide unparalleled control over exact panel location.
  • Once pockets are cut, the insert can be hammered into place in seconds, and the panel then glides quickly and firmly into place on the corresponding fasteners.
  • Quickly disassembled for flat pack shipping
  • Using pre-engineered large panel-furring systems greatly improves accuracy and efficiency.
  • On-site, the furring system can be installed during the rough the finish work. Two-stage installation protects fine panel work, and greatly reduces on-site hours during the most compressed phase of the project.

Cost & Benefit Estimates
Current estimates show that the pre-engineered system saves about 1.5 hours per 36” x 96” (or about 10%).  This system generally adds engineering hours while saving substantial shop and installation hours. The hardware cost is similar to traditional clips.  

Strength Testing with 3/4", 45 lb. particleboard
Tensile Failure (Horizontal pull) = 160 lbs.
Working Strength, Pull from Furring = 25 lbs.
Shear Failure (Vertical weight holding) = 330 lbs.
Working Strength, Weight holding = 50 lbs.

300 Green Glide Test Strength

334 Euro Screws are Included with the 300 Green Glide
Other screws are In-Progress, please call to check availability.

  • 335 Euro Screws, Cutoff to 5/16" Thread Length
  • 336 Combination Screws, 1-1/2" Thread Length
  • 338 Machine Thread, 10 -24, 1-3/8" Thread Length

Quick Introduction Animation:

Installation Guides:

300 Green Glide, Wall Panels (pdf)

Shop Demonstration Videos:

Product Specifications:

300 Green Glide, Specs, 1-28-19 (pdf)

  • Star Hanger Systems on Facebook
  • Star Hanger Systems on twitter
  • Star Hanger Systems on Linkedin
  • Star Hanger Systems on Google
  • Visa
  • MasterCard
  • Amex
  • Discover
  • PayPal
Copyright © 2024 Star Hanger Systems